Mochini oa Welding oa Pulsed Gas Shielded Nbm-250
Tlhaloso ea Likarolo tsa Sehlahisoa
Potoloho ea phepelo ea terata ea PWM e amohela phepelo ea motlakase e tsitsitseng, phepelo e tsitsitseng ea terata.
Adopt IGBT soft switch inverter thekenoloji, e etsa botle.
Boholo bo nyane, boima bo bobebe, ts'ebetso e phahameng le ho boloka matla, nako e telele ea mojaro.
Potoloho e phethahetseng ea tšireletso le ts'ebetso ea ho bonts'a liphoso, e bolokehile ebile e ka tšeptjoa.
Taolo ea loop e koetsoeng, bokhoni bo matla ba ho itaola arc, ts'ebetso e tsitsitseng ea welding.
Sebopeho se felletseng sa dijithale, kopanyo e phahameng, sekhahla se tlase sa ho hloleha ha mochini.
The welding Splash e nyane ka nako e khuts'oane ea phetoho ea potoloho 'me e haufi le ho sephalle ha ho chesoa ha pulse.
Ho boloka ts'ebetso ea welding le ts'ebetso ea mohala, ntlafatso ea software e ka ts'ehetsa lits'ebetso tse khethehileng.
Moralo o entsoeng ke motho, o motle ebile o mosa, ts'ebetso e bonolo haholoanyane.
Likarolo tsa bohlokoa li entsoe ka litšireletso tse tharo, tse loketseng maemo a sa tšoaneng a thata, ts'ebetso e tsitsitseng le e ka tšeptjoang.
Tlhaloso ea Sehlahisoa
| Matla a kenang M) | 220 |
| E reitiloe matla a ho kenya (KVA) | 7.9 |
| Motlakase o sa keneng motlakase o tsoang (M) | 65 |
| Moralo oa hajoale oa Melao (A) | 30-200 |
| 40°C20% Nako ea Mojaro Nako ea Hona Joale (A) | 200 |
| 40°C100% Nako ea Mojaro Nako ea Hona Joale (A) | 89 |
| Net boima (kg) | 17.5 |
| Litekanyo LxWxH(mm) | 700x335x460 |
| Lisebelisoa tsa motheo | Tšepe ea carbon, tšepe e tlaase ea alloy |
| Botenya ba poleiti (mm) | 0.8-6.0 |
| Bophara ba terata (mm) | 0.8-1.0 |
| Lebelo le phahameng la phepelo ea terata (m/min) | 13 |
Mosebetsi
Li-welders tsa aluminium tse pulsed hangata li na le likarolo le mesebetsi e latelang:
Pulse welding mode: Tšebeliso ea theknoloji ea pulse welding, ka ho laola maqhubu le bophara ba sekhahla sa hona joale, e ka laola ka katleho ho kenya letsoho mocheso, ho fokotsa mocheso oa mocheso.
Taolo ea botsitso ea Arc: Ka theknoloji e tsitsitseng ea switching conduction, e ka fana ka arc e tsitsitseng ea welding le ho qoba arc jump le sputtering nakong ea switjha.
Tšireletso ea khase ea pele ho tjheseletsa: Nakong ea ts'ebetso ea welding, tšireletso e loketseng ea khase, e kang khase ea inert, e fanoa ho thibela ho kenella ha oksijene ka har'a weld le ho fokotsa tlhahiso ea oxidation.
Taolo e khethehileng ea terata ea aluminium: Bakeng sa litlhoko tsa ho tjheseletsa ha aluminium, fana ka tse loketseng terata ea ho tjheseletsa ea aluminium hajoale le taolo ea motlakase, e le ho fihlela liphetho tse ntle tsa welding.
Mesebetsi e meng e thusang: Mochini oa welding oa aluminium oa pulse o ka ba le mesebetsi e meng e thusang, joalo ka preheating, preset welding parameters, overheating protection, joalo-joalo, ho ntlafatsa boleng le katleho ea welding.
Mochini oa welding oa aluminium o entsoe ka mokhoa o khethehileng bakeng sa ho cheselletsa aluminium 'me o sebelisoa haholo indastering ea ho cheselletsa aluminium.Ha u sebelisa mochini oa aluminium oa pulse bakeng sa welding ea aluminium, hoa hlokahala ho khetha li-parameter tse loketseng le Litlhophiso ka mokhoa o utloahalang ho latela lisebelisoa tse khethehileng le litlhoko tsa welding ho netefatsa liphetho tsa boleng bo holimo.Ntle le moo, opareitara e lokela ho tseba theknoloji e nepahetseng ea welding le lintlha tsa ts'ebetso ea polokeho ho netefatsa polokeho le phello ea ts'ebetso.